Access Camera via Web Browser

Access the camera via your web browser.

Check the system requirement to confirm that the operating computer and web browser meets the requirements.

Table 1. System Requirement
Operating System	Microsoft Windows XP and above version, Mac OS X 10.8 and above version
CPU	3.0 GHz or higher
RAM	1 GB or higher
Display	1024 × 768 resolution or higher
Web Browser	Internet Explorer 8.0 and above version, Mozilla Firefox 30.0-51, Google Chrome 31.0-44, Safari 8.0+

Connect the camera to the network directly, or via a switch or a router.
Open the web browser.
Input the IP address of the camera to enter the login interface.

The default IP address is 192.168.1.64. You are recommended to change the IP address to the same subnet with your computer.
Input the user name and the password.

The initial password is admin+verification code. For example, if the verification code is ABCDEF, the login password is adminABCDEF. The verification code is printed on the label attached on the camera.

Note:
Illegal login lock is activated by default. If admin user performs seven failed password attempts (five attempts for user/operator), the IP address is blocked for 30 minutes.

If illegal login lock is not needed, go to Configuration > System > Security > Security Serviceto turn it off.
Click Login.
Download and install appropriate plug-in for your web browser.

For IE based web browser, webcomponents and QuickTime™ are optional. For non-IE based web browser, webcomponents, QuickTime™, VLC and MJEPG are optional.
Reopen the web browser after the installation of the plug-in and repeat steps 2 to 4 to login. Refer to the User Manual of the Network Camera to configure the Wi-Fi settings.

Access the camera via your web browser.

Check the system requirement to confirm that the operating computer and web browser meets the requirements.

Table 1. System Requirement
Operating System	Microsoft Windows XP and above version, Mac OS X 10.8 and above version
CPU	3.0 GHz or higher
RAM	1 GB or higher
Display	1024 × 768 resolution or higher
Web Browser	Internet Explorer 8.0 and above version, Mozilla Firefox 30.0-51, Google Chrome 31.0-44, Safari 8.0+

Connect the camera to the network directly, or via a switch or a router.
Open the web browser.
Input the IP address of the camera to enter the login interface.

The default IP address is 192.168.1.64. You are recommended to change the IP address to the same subnet with your computer.
Input the user name and the password.

The initial password is admin+verification code. For example, if the verification code is ABCDEF, the login password is adminABCDEF. The verification code is printed on the label attached on the camera.

Note:
Illegal login lock is activated by default. If admin user performs seven failed password attempts (five attempts for user/operator), the IP address is blocked for 30 minutes.

If illegal login lock is not needed, go to Configuration > System > Security > Security Serviceto turn it off.
Click Login.
Download and install appropriate plug-in for your web browser.

For IE based web browser, webcomponents and QuickTime™ are optional. For non-IE based web browser, webcomponents, QuickTime™, VLC and MJEPG are optional.
Reopen the web browser after the installation of the plug-in and repeat steps 2 to 4 to login. Refer to the User Manual of the Network Camera to configure the Wi-Fi settings.